BETTER Drilling Fluid Solution Limited    E-mail: sales@drillingfluidequip.com

Механическое уплотнение Втулка вала 250x4х3х13

Products

Механическое уплотнение Втулка вала 250x4х3х13

Product No.:2023926134614

  • Details

SUPERIOR TC/TC MECHANICAL SEALS & SLEEVES IN THE PUMP INDUSTRY

Tungsten Carbide Mechanical Seal and Shaft Sleeve w/ Ceramic Coating

Mechanical Seal P25MS/TT 2-1/2 Inch
Used for MCM 250 Centrifugal Pump

Operational Conditions:
  1. Size: 2.5inch
  2. Temperature:-20 °C ...+220 °C
  3. Pressure: 16 bar
  4. Sliding velocity: 20 m/s
  5. Axial movement: ± 0.5 mm

Materials:

  1. Rotary Face: Carbon/SIC/TC
  2. State Ring: SIC/TC
  3. Seat Type: Standard AS-S16
  4. Seal: Viton
  5. Mechining parts: SS.316, SS.304
Dimensions:
3.5inch, 2.5 inch, 1.875 inch and 1.5 inch
OEM#: P25SHSLVC, 7A-250-SSC, 721580, 20613-21G-7A/641102181, 17666-002, 11-250SBPG,052144200, H20613-21G-7A

Performance Capabilities

Temperature

-20 to 200, dependent on the elastomer

Pressure

Up to 21 bar

Speed

Up to 23 m/s

End play/axial float allowance

±0.1mm

Size

2.5inch

Brand

JR

Face

Carbon, SiC, TC

Seat

Ceramic, SiC, TC

Elastomer

NBR, EPDM, FKM etc.

Spring

SS304, SS316

Metal parts

SS304, SS316

Idividual Packing

Using foam and plastic paper wrapped, then put one piece of seal in one box,finally put in standard export carton.

Remarks: The below mentioned part number is used for helping our customer fast confirmation only. We are not authorized to use these part numbers on any of our pump parts.


Previous Product:Керамическое покрытие втулки Mission 20613-21G-7A 641102181

Next Product:Mission 641102182 Shaft Sleeve Assembly 20943-21A 416 S.S.

Post your feedback

Wechat Code
Wechat