FMC WECO STYLE HAMMER UNIONS
Figure 207 Blanking Unions, Hammer unions, are one of the most common connection types in oil and gas industry as its reliable, heavy-duty, high-pressure for flow lines at drilling sites. It contains a Buna-N o-ring seal in the blanking cap to provide an efficient and dependable closure. The female sub is interchangeable with Fig.200 and Fig.206 male sub and nut They are recommended to be used for manifold line connections, pump suction & mud services, well test piping lines up to 2000psi to run water, oil or mud.
Figure 207- Gray Sub/ Blue Caps
Main Characteristics:
-Pressure: 2000psi cold working pressure, 3000 psi test pressure for standard & NACE service
-Thread: ACME
-Material: Forged Carbon Steel 25 # A395 / ANSI 1040 / A105
-Size: 3”-10”
-End Connections: NPT Threaded & Butt-welded 40(Std.) SCH.80(XH)
-Working Temperature Range: -29°C to 121°C (Buna-N)
-Sealing Type: O-ring
Safety Notes: Hammer Unions work at extremely high pressures, mismatching components of one series with others (for example, fig.602 with fig.1502) can result in a blowout and cause property damage, serious injury and/or death. Even, not matching the same series from the different manufacturers.
Figure 207 Wing Union Thread NPT |
||||||
Description |
3 in |
4 in |
6in |
8in |
10in |
|
Complete Union |
Part No. |
3207906 U270300 |
3207907 U270400 |
3207908 U270600 |
3207981 U270800 |
3207982 U271000 |
kgs |
4.5 |
7.3 |
16.8 |
31.9 |
43.5 |
|
A Clearance Radius in.(mm) |
146 |
135 |
252 |
314 |
368 |
|
B Outside Diameter, in.(mm) |
104 |
130 |
191 |
243 |
292 |
|
C End-to-end, in.(mm) |
95 |
109 |
148 |
219 |
246 |
|
D Inside Diameter, in.(mm) |
81 |
106 |
160 |
209 |
262 |
WECO Hammer Union Seals
Lip type seal ring is an elastomer component, as a secondary seal to protect metal-to-metal against corrosion, which minimizes fluid flow turbulence while creating a pressure seal. Depending on the union figure it can be a lip type “seal ring” or an “O-ring”. Different material s are available to suit for different fluid service. Buna-N (NBR) is common for standard service, Viton (FKM) for H2S service.
When you want to buy the replacement hammer unions, please remember BETTER, BETTER is a one supplier focusing on the quality, all our hammer unions are API 6A approved, to deliver those high quality parts with a surprisingly low price is our advantage.Call to speak with one of our experienced sales to tell your request!