FMC WECO STYLE HAMMER UNIONS
Hammer unions, also called wing unions, are one of the most common connection types in oil and gas industry as its reliable, heavy-duty, high-pressure for flow lines at drilling sites. Figure 1003 hammer union, misaligning union has a ball seat incorporating a primary “O” ring seal with a metal secondary seal which assures perfect sealing in misalignment position. It can give a 7.5 degree angular adjustment from the center(15 degree total). This union is ideal for where lines cannot be aligned to run water, oil or mud. Available in 10000psi with end threaded or buttweld for welding.
Figure 1003 - Green Sub/ Black Nut (Non-NACE)
Main Characteristics:
-Pressure: 7500psi NSCWP 11250psi Test for standard service;5000psi NSCWP 7500psi Test for NACE service
-Thread: ACME
-Material: Forged alloy steel 35CrMo, ANSI 4130, A350 LF2
-Size: 3”-5”
-End Connections: NPT Threaded & Butt welded SCH.160 and XXH
-Working Temperature Range: -29°C to 121°C (Buna-N lip seal ring )
Safety
Notes: Hammer Unions work at extremely high pressures, mismatching components
of one series with others (for example, fig.602 with fig.1502) can result in a
blowout and cause property damage, serious injury and/or death. Even, not matching
the same series from the different manufacturers.
Figure 1003 Wing Union Butt Weld Schedule XXH
Description
2 inch
3 inch
4 inch
5 inch
Complete
Union
Part No.
3257227
3261476
U130540
kgs
6
21.8
37.2
39.4
Nut
Part No.
/
3257232
3261479
/
Kgs
/
10
17.7
/
Male Sub
Part No.
/
3267225
3261478
/
kgs
/
7.3
11.8
/
Female
Sub
Part No.
/
3257226
3261477
/
Kgs
/
4.6
7.7
/
Viton O
Ring
Part No.
/
3231057
3233034
/
A Clearance Radius in.(mm)
88.9
4.88(124)
5.75(146.1)
5.96
B Outside
Diameter, in.(mm)
60.3
3.5(88.9)
4.5(114.3)
5.56(141.3)
C End-to-end, in.(mm)
120
9.12(231.7)
10.93(277.6)
10.94
D Inside
Diameter, in.(mm)
38.1
2.3(58.4)
3.15(80)
4.06(103.2)
X degree max.
4
7.5
7.5
7.5
Figure 1003 Wing Union NPT Thread standard |
||||
Description |
2 in |
3 in |
4 in |
|
Complete Union |
Part No. |
3208519 U130240 |
3219928 U130340 |
3219932 U130440 |
kgs |
5.4 |
20.4 |
33.6 |
|
A Clearance Radius in.(mm) |
95 |
124 |
146 |
|
B Outside Diameter, in.(mm) |
76 |
111 |
140 |
|
C End-to-end, in.(mm) |
118 |
232 |
278 |
|
D Inside Diameter, in.(mm) |
55 |
81 |
102 |
Note: The material elastomer used is depended on the operation temperature.
WECO Hammer Union Seals
Lip type seal ring is an elastomer component, as a secondary seal to protect metal-to-metal against corrosion, which minimizes fluid flow turbulence while creating a pressure seal. Depending on the union figure it can be a lip type “seal ring” or an “O-ring”. Different material s are available to suit for different fluid service. Buna-N (NBR) is common for standard service, Viton (FKM) for H2S service.
When you want to buy the replacement hammer unions, please remember BETTER, BETTER is a one supplier focusing on the quality, all our hammer unions are API 6A approved, to deliver those high quality parts with a surprisingly low price is our advantage.Call to speak with one of our experienced sales to tell your request!